No products in the cart.
Showing 1–12 of 33 results
A051 Back Plate
Dimensions:Â 460 x 255 x 15 mm Current Stock:Â 91 Weight:Â 15 kg It is easier and quicker to replace damaged bumpers or studs fixed to a back plate compared to those fixed directly into concrete. This backplate has no galvanised coating so that it is better for welding to steel structures.
A052 Back Plate
The A052 Back Plate is a simple galvanised steel backing plate with returns to hold sacrificial front plates in various materials whilst remaining undamaged. Can be used in conjunction with A033 or A038.
This backplate has 4 x M15 countersunk holes for fixing to the loading bay.
A054 Back Plate
The A054 is the backing plate used in our A021 Dock Bumper.
This backplate has 4 fixing holes... 2 at the top are 25mm dia to allow for M24 bolts to fix to an above dock angle bracket ( if required ) and 2 at the bottom at 20mm dia.
A055 Back Plate
The A055 is the backing plate used in our A022 Dock Bumper.
This backplate has 4 fixing holes... 2 at the top are 25mm dia to allow for M24 bolts to fix to an above dock angle bracket ( if required ) and 2 at the bottom at 20mm dia.
A056 Back Plate
The back plate has 3 x M24 threaded holes to accommodate any of our 750mm rubber bumpers. There are also 6 holes for fixing the plate to the bay, 4 are 18mm dia and 2 are 27mm dia ( the larger holes are there to allow this part to be
A057 Back Plate
This backplate has 6 fixing holes... 2 at the top are 25mm dia to allow for M24 bolts to fix to an above dock angle bracket ( if required ), 2 half way down and 2 at the bottom 20mm dia.
A058 Back Plate
The A058 is the backing plate used in our A024 Dock Bumper.
This galvanised backplate has 6 fixing holes... 2 at the top are 25mm dia to allow for M24 bolts to fix to an above dock angle bracket ( if required ), 2 half way down and 2 at the bottom 20mm dia.
A061 Dock Bumper Accessory
This angle bracket allows standard back plate and dock bumper assemblies to be fixed 150mm above the dock height to prevent vehicles over-riding. Brackets are finished in red (RAL 3020) powder coat finish. Two fixing holes are M24 threaded and two are 26mm dia clear holes.
A062 Dock Bumper Accessory
This angle bracket allows standard back plate and dock bumper assemblies to be fixed 250mm above the dock height to prevent vehicles over-riding. Brackets are finished in yellow (RAL 1028) powder coat finish.
A675 Packer
The A675 Packer is a 18-20mm thick piece of rubber designed to allow fine adjustment for the projection dimension of the dock bumper whilst maintaining the dock bumpers ability to compress. This packer can be supplied plain or with holes drilled to suit a particular bumper (for an additional cost).
A046 Packer
Dimensions: 450 x 250 x 50 mm Weight: 5.5 kg The A046 Packer is a 50mm thick piece of rubber designed to allow adjustment for the projection dimension of the dock bumper whilst maintaining the dock bumpers ability to compress.
A047 Packer
Dimensions: 450 x 450 x 15 mm Weight: 2.3 kg The A047 Packer is a 15mm thick piece of rubber designed to allow fine adjustment for the projection dimension of the dock bumper whilst maintaining the dock bumpers ability to compress.